Temperature & Humidity Transmitter for Indoor / Duct type

Excellent long-term stable ability
Cost-effective and accurate measurement
Outstanding long-term performance
Voltage or current outputs
Specifications:
Sensor type: MEMS sensor
Measuring range: 0...50°C / 0...100%RH (Non-condensing)
Output: 4...20mA / 0...10 V
Signal connection: 2-wire / 3-wire
Warm-up time: ＜2 min; Stable time 20 min
Response time: t63 (15°C to 45°C / 33 to 75%RH) ≦ 10 sec
Sampling time: About 3 sec
Temperature influence: Max.-0.15%RH/°C (0°C ... 80°C)
Load resistance：Current＜250 Ω；Voltage≧10 KΩ
Accuracy (at 25°C): ±0.5°C / ±5%RH (30...80%RH)
Medium: Air
Operating Temp.: 0...+50°C
Operating Humid.: 0...100%RH (Non-condensing)
Storage Temp.: -20...+60°C
Power supply: DC 15...35 V / DC 19...35 V & AC 24 V±10%
Current consumption DC: Max. 80 mA / AC: Max. 150 mA
Electrical connection: 2-wire: 3P connector / 3-wire: 4P connector
Installation: Indoor: Wall mount; Duct: Flange
IP rating: IP54
Electrical protection: Polarity protection, Over-voltage, Short circuit
Certification: CE
Housing material: PC (PC-110) (UL94V-2)